Recent Changes

Parkcrest - Snowman Description edited Add your description here... Snowmen Making Group 1 Hi this is Parkcrest and this is our snow…

Add your description here...
Snowmen Making
Group 1
Hi this is Parkcrest and this is our snowmen.
The bottom is 30 cm on the short side on the box and 38 cm long side of the box and 14 cm tall.
The middle box is 27 cm on the long side and 18 cm on the short side 13 and a half for how tall it is.
The top box is 23 cm on the long side and 18cm short side 13 cm and a half for how tall it is.
Now paint all the boxes white and then glue them together.
On the middle box, paint cotton balls black like buttons and stick them three in a row top to bottom use three.
Then stick three toilet paper rolls together (x2) with tape and then paint them brown.
Then stick them on each side of the middle box. We used tape.
For the head we painted cotton balls black for the eyes and stuck them on.
For the nose we cut out 5cm equilateral triangle out of cardboard. Then we taped orange construction paper on the top of the cardboard. We put it on the box 1 cm from the bottom of the eyes. We attached it with tape.
The mouth was painted on with black paint. A nice big smile that was ¾ of the width of the head. Then we made a scarf that was 104 cm we made it out of three types of string. Red, blue and black. The red is wool that is has some ruffles to it. The black and blue is just regular wool.
Then we braided them together and then we tied them around him.
Then we used a styrofoam cup for his hat. We wrapped black construction paper around the cup. We used tape to stick the paper on the cup. Then we taped the cup to the snowman’s head.
GOOD LUCK form Parkcrest.
Snowman Instructions
Group 2
Step 1: Gather boxes/rolls etc. All boxes are painted white.
Step 2: (bottom [2 boxes])8 cm. wide, 32 cm (length), boxes is 8 cm width.
Step 3: (2 Middle boxes) First box 22cm length, 6 cm high, 13 cm wide.
Step 4: Second box placed on top is 23cm long, 10 cm high, 10cm wide.
Step 5: (The head) Length is 15cm, height is 12.5cm, width is 6cm
Step 6: We used two toilet paper rolls for each arm. (so 4 in total) They are painted brown.
Right arm 19cm length. Tape it on.
Left arm [cut hole in the second middle box] and put the arm in until it sticks out at 13 cm.
The nose is 7cm and is made out of construction paper rolled into a cone shape.
Step 7: The hat is a box thats 9cm in length, 12.5 cm in height and 8.5 cm wide. Paint it black. Take a small paper plate and paint it black. Attach the paper plate to the head of the snowman and then attach the small box on top. It should look like a top hat.
Step 8: We used cotton balls and dipped them in green and red paint. We made 2 green and 3 red. We used the 3 red for the buttons and the 2 green for eyes.
First red button is on the crease of 2 bottom boxes. Second red button is on the first middle box.
Third button is on the second middle box.
SNOWMAN! Group 3
For the bottom we used a big box it was 30cm long, 22.1 cm tall and for the width it was 12 cm in width .
The second box we used was 28cm long, 19 cm tall for the width it was 11 cm .
For the top box it 26 cm long, 16 cm tall and 8.1 for width .
For the slippers we glued toilet paper rolls to front the bottom. We then used white paint to stick cotton balls on the toilet paper rolls. We also used green ribbons to look cute! <3 So there was cotton balls stuck all over toilet paper rolls. They look like 2 big, fluffy rabbit’s tails.
For the arms we used toilet paper rolls . One for each side. They are attached to the middle box and point directly out to the sides.
There are 3 cotton balls dipped in black paint for the buttons. They are attached vertically to the second (middle) box.
We also used cotton balls for the eyes, nose, and mouth. We dipped them in black paint before we attached them .
Each eye is a cotton ball dipped in black paint and attached to the head.
The nose is placed roughly 5cm from each eye. It looks like a wide based triangle with the two eyes and the nose.
The mouth is 4 black cotton balls attached in a smile shape underneath the nose, about 4cm below.
For a little decoration we also used attached a mustache made out of paper and black marker. It is about 15cm wide. Look below for example!!
We made a scarf. It is a piece of tissue paper that is about 40 cm long and 12 cm wide. It is attached to the front only, just under the mouth. We cut the ends to make it look like fringe.
For the hat, it is a red solo cup attached to the top. We painted a paper towel roll red and white like a candy cane and attached it to the top of the cup. The roll is pointing to the sides. We made a small snowflake and attached it to the front of the roll right above the cup.
There is another snowflake attached to the left cheek of the snowman. (Left if you are looking at it) About 7cm diameter. It is right off the last cotton ball.
We also put some strings down the side of the snowman’s head to make it look like stringy hair. It is about 15cm. It has a variety of colours. The string is like embroidery thread but regular string would be fine. There is about 6 per side. Glue them to the top of the head and let them hang down the sides. {https://lh6.googleusercontent.com/YfY2xxml5bQdzPwIdVh3WvMnIcD4O5uV4gsZ4BpUgbTeHjKTMGnqG7FuxIUQ6JNsTY-U0UYOZyY1DhjdV-0F76Sq0n9cWamvT9AmZC4h6r6G50lk3nofuSqjFQ}
Snowman Instructions
First you take a box (shoe box) thats 42 cm long, by 11 tall cm by 25.5 cm wide. Paint it white. This is the base of your snowman.
On top of that box, have a box that is 24 cm long by 21 cm tall by 17cm wide. Paint it white. This is the middle
On top of that box have a box thats 23 cm long, by 9 cm tall, by 13.5cm. Paint it white. This is also the middle .
For the head get a box thats 13cm long, 9cm tall, by 9cm wide. Paint it white.
This is the head.
For the arms use (4) toliet paper rolls per arm. They should be about 23cm in length. We just attached them together by stuff one end into the other. Paint them brown. Attach the arms to the top of the two middle boxes. They point outward and downward. We have put them through the holes that were in the box.
For the hat, use a 9cm red solo cup that is painted black. Get a paper plate thats 21cm in diameter. Paint it black. Glue the solo cup on top of the paper plate. Attach the hat to the top of the snowman.
The nose is 26cm long made with orange construction paper. It is rolled into a long cone shape. It is taped in several places to keep it in place. Attach to the snowman head slightly above the middle.
There are 2 black cotton balls for eyes. They were dipped in black paint. They are attached on either side of the nose.
On the chest, there are 3 black cotton balls for buttons each 4 cm apart. One cotton ball starts on the top middle box, then the next two go on the bottom middle box.
Our Snowman Group 5
All the boxes are wrapped in white paper. We used paper from the large rolls of paper at the school. (Bulletin board paper). We wrapped them just like Christmas presents.
The bottom box is 12 cm high, 32 cm long and 27cm wide. The middle box is 11 cm high, 28 cm long and 21 cm wide. The top (head) box is 13 cm high, 16 cm long and 5 cm wide. They are all attached together.
For the head/face of the snowman, there is a white paper plate glued to the front/face of the snowman. It makes the snowman’s head look round. It is about 21.5cm in diameter. (*See below for further instructions about the plate)
The eyes are painted on the paper plate. They are round black circles about 5cm in diameter.
The mouth is made out of black string. It is glued to the paper plate in a smile shape. The string is about 15cm long.
The nose made out of orange construction paper and is 12 cm long and 2 cm wide. It is attached to the middle of the plate with tape. The eyes are above the nose and quite close together.
* Roughly 5 cm is cut off the paper plate in a straight line. This is the top part of the face of the snowmen.
The hat is made out of a red solo cup. It is 12 cm high and 7 centimeters wide. The hat is stuck on by 2 vertical slits cut into the paper plate at the front. Keeping the back of the hat up is a toilet paper roll wedged underneath. This makes the hat tilt slightly to the back. You will probably need to tape your hat.
The scarf is purple construction paper and is 51 cm long and 5 cm wide. It is attached to the the front of the snowman at the bottom of the head. The middle is tucked underneath the paper plate then the rest drapes down the front edges of the middle box. There is fringe cut along the ends.
The feet are made out of cotton balls, 3 long, 2 high. They are attached to the bottom of the snowman at the front about 5cm from each end.
The arms are made out of paper towel rolls. They are painted white and are attached through holes in the sides.
There are 3 fingers on each arm. They are cut out of cardboard (toilet paper rolls). The fingers are 6cm by 2.5cm.
There are 3 buttons, 2 on the middle and 1 on the bottom. They are black. Make them out of black construction paper. They are 2 cm in diameter.
His hat has strips of orange,green,purple and yellow construction paper on it. The strips run vertically and are 7.5cm long and 2cm wide. The front strip is green. The left side has a yellow strip, the right side has an orange strip and the back side has another yellow strip. The top of the hat (which is the bottom of the cup) has a dark pink rim of paper that is about 1cm wide. Our strips are sparkly but yours do not have to be :)

(view changes)

Summit - Snowman Description edited Add your description here... Find your group. Type out the directions for the creation of your …

Add your description here...
Find your group. Type out the directions for the creation of your
snowman. Remember to proofread and edit your directions.
GROUP 1 (Tyson, Maggie, Macy, Ella, Emma and Taylor)
Snowman Instructions-Group 1
Roberto=the snowman
Materials Needed:
2 toilet paper rolls
1 cereal box measuring 29.5cm by 19.5cm by 6.7cm
2 styrofoam cups
1 black felt
28 cotton balls
1 piece of orange felt ( should be reasonably sized)
white paint
Gather all the materials needed and spread on a cleared surface.
Legs:
1. Using 2 styrofoam cups, measure 3 cm (30 mm) from the bottom.
2. Now at the measurement you just made, make a mark on the cup. Do the same on the other cup.
3. Cut 6 pieces of tape into 4.5cm strips. Fold inside out so the sticky side is on the outside.
4. Stick one piece of the folded tape 90 degrees horizontal to the marks you made on the styrofoam cups.
5. Do the same rotating the cup counter clockwise sticking the folded tape every 90 degrees. Paste a piece of tape on the mark made.
6. Stick the first cup made into the opening of the cereal box.
7. Stick cup in until the cereal box meets the mark you made on the body, making sure the tape sticks to the box.
8. Now do the same with the other cup.
Body:
1.Using the cereal box, measure 20cm(200mm) and make a mark on the two sides measuring 29.5 cm by 6.7cm.
2. Pour some of the white paint into a jar and start painting the outside the cereal box.
3.Now stick four 4.5cm pieces of tape one quarter of the way up a toilet roll on one edge. It’s okay if the tape overlaps as long as the tape surrounds all the way around the roll. The edges of the tape should line up.
4. Once the paint has dried, take the side of the roll that has tape on and stick it level to the mark you made on the cereal box so the tape on the toilet roll is half on the cereal box and half on the toilet roll.
5. Put the pieces of tape so it’s three-quarters on the cereal box and and one-quarter on the toilet roll.
6.Secure the roll to the box with more 5cm pieces of tape if needed.
7. Do the same to the other side.
Eyes & Mouth:
1. Cut two loonie sized eyes out of black felt for the eyes.
2. Stick the eyes 7cm apart above about four fifths up from the bottom of the box.
3. To make the mouth, arrange four loonie sized pieces of black felt approximately 1.5 cm apart, in a smile like form.
Cape:
1. To make the cape cut black felt out 30cm long and 20cm wide. The cape should wrap around the sides and should be a bit longer than the snowman.
2. To secure the cape to the snowman, you will need to place three pieces of tape (folded so that the sticky side is facing up) on the top end.
3. Place one piece of tape in each top corner.
Afro
1. Place 30 cotton balls on top of the head.
2. Make a circular shape using the cotton balls
3. Glue the mountain of cotton balls using a glue stick by putting glue at the center of the top of the cereal top and pressing the cotton balls down.
Now you are done your snowman.
GROUP 2 (Kate, Amy, Haley, Austin, Siara and Abby)
Bottom
Take a big box for the bottom of the snowman. If the box has an openable lid,tape it down.
Middle
For the middle of the body take a kleenex box.
Top
Take a thin cereal box and cut off the bottom part(about 4 inches) of the box
putting it together
1. Put the bottom box(the shoe box) on a table .Then take your kleenex box and glue the perimeter of the top. Then place the in the middle of the bottom one and hold it tightly on for 1 minute.
2. Take your cereal box and two strips of paper that are 3 inches long . Glue one half in the box then tape the other half to the kleenex box.
3. When you have your three pieces put together paint your entire snowman white.
4. After it is dry take two toilet paper rolls for the arms and cut out two cardboard circles that are the same size as the end of the toilet paper roll. Tape one to each toilet paper roll on one end. Put glue on the cardboard piece and stick one on each side of the middle body. Add extra tape in needed.
5. For the eyes take a piece of fabric or felt and cut out two circles (4cm across) and then glue them to the top box.
6.For a scarf take a piece of yarn that is 1 meter and 30 inches long and wrap it around the neck (In between the top and middle body.)
7. For a nose cut out a triangle from a toilet paper roll (3cm by 3cm by 3cm) and put glue along one edge of the triangle and stick it on belong and in between the eyes.
8. For buttons take any colour of fabric of felt and cut out three small equal size circles and glue them on. First one at the top of the middle body and the next one just below, but the third one goes at the top of the bottom box.
9. Take another 4 inch piece of yarn and tape it on below the nose in an upward curve for the mouth.
10. For extra decoration glue cotton balls all along the bottom of the snowman. Finally you are done!
GROUP 3 (Ty, Mya, Rowan, Kirsten,Isaak and Anika)
Snowman Match Directions
1. First you take your two cereal boxes and cover them in multiple coats of white paint, take your cotton balls and apply them on thewet paint.
2. As the point is drying take your paper towel roll and cut it in half.
3.Then take the two pieces of the paper towel roll and wrap them in the white paper. To do this you must roll a piece of paper over the roll and trim off the ends. Then you take your tape and put it in the open ends.
4.Then once the box has dried take a pair of scissors and then stab them in and go around the whole to make a circle. Then insert the tubes in the holes.
5. Then next you will make the head. Stack three styrofoam cups and tape them vertically together.
6. Next next make the eyes you must take your tart tins and glue the bottoms of more styrofoam cups on them (cut the bottoms off of the cups). Draw a red pupil on one eye and a blue pupil on the other, on the eye that has a red pupil draw four blue lines for veins, do the same but in red on the eye that has a blues pupil. Tape them onto the head/styrofoam cups.
7. You now make the nose, get light pink or peach coloured felt and cut an oval to make a pig nose. Draw two lines on the oval to make a pig nose. Glue the finished nose to the middle of the head.
8. Now take your head and draw a smile on it.
9. To make the scarf you must take some yarn and twist it together. Tie it around the neck, bottom of the head.
10. Tape the head onto the body and you are now finished you snowman.
GROUP 4 (Dylan, Jalen, Malina, Skylar, Akemy and Sawyer)
Snowman Match Directions Group 4
Materials
2 medium cereal boxes
1 small cracker or cookie box
Black felt
Two very large sheets of white paper
One large sheet of white paper
One small pom-pom
2 small styrofoam cups
1 toilet paper roll
1 black felt marker
1 red felt marker
tape
glue stick
purple and brown paint
Directions
1. First, grab one of the medium boxes. Wrap it in white paper as if it were a present. Do the same to the second medium box. The paper should be about 36 X 23 cm big. Wrap the small box as if it were a present as well, the paper should be slightly smaller.
2. Second, You need to connect all of these boxes. To do so, glue each of the box's sides with a glue stick make sure it is the skinny side. The boxes logos should be facing sideways. The Medium boxes should be the bottom two and the smallest one should be on the very top.
3. Before making the buttons made out of felt. Glue the two largest boxes together. They must be placed on the side so the logos are sideways.Next, glue a small box, also wrapped in white paper on the top, also with the logo facing sideways. Cut two more circles, exactly like the buttons and place them beside each other on the head, these will be the eyes.
Below the eyes, draw eleven little black dots in a vertical semi-circle using a black felt pen.
For the nose, cut one end into a triangle and staple it closed, then paint it purple. Then paint your two styrofoam cups brown, these will be the arms. After the brown arms dry, glue or tape them on the right and left side of the medium box.
4.Then cut some black felt from your strip then fold the felt four times and cut a circle in the middle. After your done you should have two round circles and two circles stuck together, cut them apart then use the two black felt buttons and glue them to the middle of the box on the snowman but make them seperate apart so there is space in the middle. Then colour one cotton ball red and stick it in the empty space between the two black buttons with a glue stick.
GROUP 5 (Nathan, Taryn, Lucy, Mady and Govah)
Snowman match Group Five
Materials
9 pieces of unlined paper
1 big cereal box
2 kleenex boxes
3 styrofoam cups
at least 60 cotton balls
13 cm by 30cm of orange felt
3 small tin cups
clear tape
60 cm of any color of yarn
2 toilet paper rolls
black and pink felt pens
To make a snowman you need to gather the materials listed.
Take the big cereal box and wrap it in 5 pieces of unlined paper so no box is still showing.
Take a kleenex box and wrap it until there is no box showing.
take a toilet paper roll and tape one of the ends and tape it to the bottom of the cup. repeat this once more. These are the arms
Take the two arms you just created and wrap them in unlined paper until there is no more cardboard to be seen.
Tape six cotton balls to the ends of the arms. Do this to the other arms too.
Take a styrofoam cup and wrap it in orange felt and tape it. This is the nose.
now tape the nose to the center of the kleenex box.
Now tape the small box to the top of the biggest box.
now take the arms you made and tape them to the narrow sides of the biggest box.
Now draw with the black marker a dot smile that is located under the nose. Now draw two eyes above the nose.
Now take a kleenex box and cut out a flat piece of cardboard that is 17cm by 11cm and tape it to the top of the whole snowman.
Tape a styrofoam cup to the top of the flat piece of cardboard. and tape it down.
now take four cotton balls to the top of the cup you just taped to the top of the head
take 60 centimeters of string and wrap it around his neck.
now for the finishing touch sprinkle 50.

(view changes)

Summit - Snowman Description edited Add your description here...

Add your description here...

(view changes)

home edited ... Timeline Materials List Chase Parkcrest - Grade 1 Snowman Description Chase Summit…

...

Timeline
Materials List
ChaseParkcrest - Grade 1 Snowman Description
Chase
Summit - Grade 2 Snowman Description
Chase - Grade 3 Snowman Description
Bert Edwards - Grade 1 Snowman Description
Bert Edwards - Grade 2 Snowman Description
Bert Edwards - Grade 3 Snowman Description
Some 'Monster Match' wikis to use as an example.

(view changes)

Snowman BEST.pdf (deleted) uploaded Deleted File

Chase - Grade 1 Snowman Description (deleted) edited

Bert Edwards - Grade 1 Snowman Description (deleted) edited

Parkcrest - Snowman Description edited Add your description here...

Add your description here...

(view changes)

Bert Edwards - Grade 1 Snowman Description (deleted) edited

grade 3 snowman match.pdf (deleted) uploaded Deleted File